Hello, I just purchased this bike a few days ago. 2002 KLR250 with 9300 miles on it.
Bike wont idle. Here is what I've done, I've been reading as many of these posts about carb I could find.
Changed oil, Cleaned air filter and oiled, Adjusted the valves this morning (run better since), cleaned the carb, drilled the slide, added the washer to the needle (.030")
bike has the factory jets, 118 main, and 35 pilot. Air screw at 2 turns. Dumped the gas and added new. Starts up well with the choke, We are at 4100 ft. alt. So I'm thinking the pilot jet is the problem.
Any help would be great. Mark